石英晶体板非线性高频振动的拓展伽辽金法分析

针对考虑几何和材料非线性的石英晶体板厚度剪切振动和弯曲振动的方程组,利用扩展伽辽金法对该方程组进行转化和求解,分别获得了强烈耦合的厚度剪切振动模态和弯曲振动模态的频率响应关系,绘制了不同振幅比和不同驱动电压影响下的频率响应曲线图。数值计算结果表明可以选取石英晶片的最佳长厚比尺寸来避免两种模态的强烈耦合。驱动电压的变化将引起石英晶体谐振器厚度剪切振动频率的明显改变,必须将振动频率的漂移值控制在常用压电声波器件的允许值之内。扩展伽辽金法对石英晶体板非线性振动方程组的求解为非线性有限元分析和偏场效应分析奠定了基础。     

双激光脉冲打靶形成Gd等离子体的极紫外光谱辐射

高端芯片制造所需要的极紫外光刻技术位于我国当前面临35项"卡脖子"关键核心技术之首.高转换效率的极紫外光源是极紫外光刻系统的重要组成部分.本文通过采用双激光脉冲打靶技术实现较强的6.7 nm极紫外光输出.首先,理论计算Gd¹⁸⁺—Gd²⁷⁺离子最外层4d壳层的4p-4d和4d-4f能级之间跃迁、以及Gd¹⁴⁺—Gd¹⁷⁺离子最外层4f壳层的4d-4f能级之间跃迁对波长为6.7 nm附近极紫外光的贡献.其后开展实验研究,结果表明,随着双脉冲之间延时的逐渐增加,波长为6.7 nm附近的极紫外光辐射强度呈现先减弱、后增加、之后再减弱的变化趋势,在双脉冲延时为100 ns处产生的极紫外光辐射最强.并且,在延时为100 ns处产生的光谱效率最高,相比于单脉冲激光产生的光谱效率提升了33%.此外,发现双激光脉冲打靶技术可以有效地减弱等离子体的自吸收效应,获得的6.7 nm附近极紫外光谱宽度均小于单激光脉冲打靶的情形,且在脉冲延时为30 ns时刻所产生的光谱宽度最窄,约为单独主脉冲产生极紫外光谱宽度的1/3.同时...     

一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

介观电路中量子纠缠的经典对应

从量子力学诞生日起,它的经典对应(或类比)一直是物理学家关心的话题.本文以介观电路量子化的框架中,带有互感的两个介观电容-电感(LC)电路为例,首次讨论了量子纠缠的经典类比(或对应)问题.先用有序算符内的积分理论证明其互感是产生量子纠缠的源头;再推导出求解特征频率的公式,就发现它与一个经典系统的小振动频率的表达式有相似之处,该经典系统组成如下:两个墙壁各连一个相同的弹簧,两个弹簧之间接着一个滑动小车可以在光滑的桌面上运动,小车挂有一根单摆.用分析力学求此系统的小振动频率,发现与上述介观电路的特征频率形式类似,单摆的摆动会造成小车来回振动,摆、小车和弹簧的互相牵制效应反映了小车和摆的"纠缠".     

Dynamic Modeling of the Feed Drive System of a CNC Metal Cutting Machine

Studying the vibrational behavior of feed drive systems is important for enhancing the structural performance of computer numerical control (CNC) machines. The preload on the screw and nut position have a great influence on the vibration characteristics of the feed drive as two very important operational conditions. Rotational acceleration of the screw also affects the performance of the CNC feed drive when machining small parts. This paper investigates the influence of preload and nut position on the vibration characteristics of the feed drive system of a CNC metal cutting machine in order to be able to eliminate an observed resonance occurred at high rotational speeds of the screw, corresponding to high feed rates. Additionally, rational structural parameters of the feed drive system are selected in order to increase the rotational acceleration for improving the performance of the CNC machine. Experiments and analyses showed that by selecting specific parameters of feed drive system and simultaneously applying a certain value of preload, a 97% increase in rotational acceleration and 30% time reduction considering the vibration resistance at high rotational speeds can be achieved.     

现代分析仪器在高中化学教学中的应用*——以“防晒霜的防晒效果实验探究”为例

从高中化学原子、分子等抽象性的知识教学出发,以防晒霜的防晒效果实验探究为例,探讨了现代分析仪器在高中化学教学中的应用。通过利用现代分析仪器紫外可见分光光度计,结合紫外线变色球实验探究防晒霜的防晒效果,分析并认识防晒霜中化学防晒的机理。结果表明,防晒霜的厚度越大、SPF越高,防晒霜的防晒效果越好,并且防晒霜的防晒效果可以持续一段时间,但是不同类型的防晒产品存在一定差异。在化学教学中渗透现代分析仪器的应用,为学生进一步了解化学学科在改变学习方式、拓宽学科知识领域、推动自身全面与可持续发展方面打下坚实的基础。     

Spectrum–effect relationship of antioxidant and anti-inflammatory activities of Laportea bulbifera based on multivariate statistical analysis

Laportea bulbifera, named Hong He Ma in Chinese, is a Chinese herbal medicine commonly used by the Miao nationality of China. In this study, 43 batches of L. bulbifera were collected from different origins in China. Ethanol, ethyl acetate and petroleum ether were used to prepare different extracts of the plant. UHPLC technique was used to establish the fingerprints, whereas DPPH assay and RAW264.7 inflammatory cell models were used to evaluate the antioxidant and anti-inflammatory activities, respectively. Moreover, the spectrum–effect relationship between relative peak area of common peaks and efficacy value was set up by multivariate statistical analysis. Furthermore, 10 batches were selected randomly for validation of those models. The results showed that ethyl acetate and petroleum ether extracts possess excellent antioxidant and anti-inflammatory activities, respectively. Peaks A₆ and A₇ demonstrated the greatest antioxidant activity, while peak A₁₇ showed the strongest anti-inflammatory activity. After a verified experiment, the result was obtained and illustrated that the spectrum–effect relationship which we established could reliably infer antioxidant and anti-inflammatory compounds of the Chinese herbal medicine.     

Dynamic Interactions in Synthetic Receptors: A Guest Exchange Saturation Transfer Study

The accumulated knowledge regarding molecular architectures is based on established, reliable, and accessible analytical tools that provide robust structural and functional information on assemblies. However, both the dynamicity and low population of noncovalently interacting moieties within studied molecular systems limit the efficiency and accuracy of traditional methods. Herein, the use of a saturation transfer-based NMR approach to study the dynamic binding characteristics of an anion to a series of synthetic receptors derived from bambusuril macrocycles is demonstrated. The exchange rates of BF₄⁻ are mediated by the side chains on the receptor (100 s⁻¹<k_ex<5000 s⁻¹), which play a critical role in receptor-anion binding dynamics. The signal amplification obtained with this approach allows for the identification of different types of intermolecular interactions between the receptor and the anion, something that could not have been detected by techniques hitherto used to study molecular assemblies. These findings, which are supported by a computational molecular dynamic study, demonstrate the uniqueness and added value of this NMR method.     

Validation of quartz crystal rheometry in the megahertz frequency regime

The utility of the quartz crystal microbalance (QCM) as a high‐frequency rheometer operating at 15 MHz was demonstrated. High‐frequency data obtained from a series of rubbery materials were compared with results obtained from traditional dynamic mechanical analysis (DMA) at much lower frequencies. The high‐frequency data enable meaningful shift factors to be obtained at temperatures much further above glass‐transition temperature (T _g) than would otherwise be possible, giving a more complete picture of the temperature dependence of the viscoelastic properties. The QCM can also be used to quantify mass uptake and changes in viscoelastic properties during sample oxidation. The viscoelastic response spanning the full range of behaviors from the rubber to glassy regimes was found to fit well with a six‐element model consisting of three power‐law springpot elements. One of these elements is particularly sensitive to the behavior in the transition regime where the phase angle is maximized. The value of this quantity is obtained from the maximum phase angle, which can be obtained from a temperature sweep at fixed frequency, proving a means for more detailed frequency‐dependent rheometric information to be obtained from a fixed‐frequency measurement at a range of temperatures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1246–1254     

A MODAL TESTING METHOD FOR CANTILEVER BEAM1)

基于欧拉-伯努利梁理论得到悬臂梁自由振动的振型函数。通过数值计算得出实验用的悬臂梁前五阶振型的节点位置及其与梁长的比值。考虑传感器对悬臂梁固有频率的影响,建立梁-传感器模型进行仿真分析并得出悬臂梁前五阶固有频率。基于节点位置和测点位置,在实验中选择激励点。将具体实验的结果与梁-传感器仿真模型结果进行对比,通过前五阶固有频率的误差分析,发现仿真分析结果与实验结果误差最高为 1.3%。研究完整地叙述了悬臂梁的模态测试流程,可为工程技术人员的模态测试起一定的指导作用。